Introduction

Aluminum honeycomb panel is a combination of panels, aluminum honeycomb, floor three layers of materials, are metal, used in the past bonding will use epoxy resin adhesive or polyurethane liquid adhesive mostly, some small honeycomb panel will also use PUR hot melt adhesive, the use of these adhesives disadvantages are, curing time is long, there is an obvious sense of fragile, the need for a relative system of production lines or equipment, Moreover, the epoxy resin film is relatively thick, the shelf life is short, and the storage is difficult. It is recommended to use thermoplastic hot melt adhesive film.

If you need high quality adhesive films for aluminium honeycomb panels manufacturer & long-term oversea partner, please contact Jiangyin Weitao!

 

Product Specification

The adhesive films for aluminium honeycomb panel regular thickness is 0.01~0.2mm

With release paper or without release paper

The max width is 160CM

All Adhesive films are also can be customized according to the customer`s request

 

Product Advantage

1.Adhesive films for Aluminium Honeycomb Panels are suitable for bonding many materials, e.g. fiber fabric, leather, wood, glass, ceramic, metal, plastic (polyolefin Material need to be done by Pre-treatment) etc., the range of bonding is very wide.

2.Fast curing speed, fast bonding, suitable for efficient production line

3.It can be used at -20~+105℃ with excellent solvent resistance and electrical insulation performance.

4.100% solid, solvent-free, no pollution to the environment.

5.There are three forms of Film, Granule and Powder, and it is convenient to use in different occasions

 

Product Packaging

100M2/Roll,Woven bags lined with plastic bags or Carton.

It can be customized according to the customer request.

 

Application

The adhesive film for auminium honeycomb panel can be used for fiber fabric, plastic, metal, wood, ceramic and other materials' bonding. It is widely used in decals and label stickers of clothing industry, automobile industry, electronic industry, packaging industry, communication industry and so on.

 

Product Operation Instructions

Operating temperature is 130-200 ℃. The surface of the Adhesive films material should be dry and clean without oil. Sometimes glued objects should be roughening.

Place the film onto the object. Heat it to above the melting temperature, press it properly, tear off the release paper, heat it to above the melting temperature, then stack the other bonding surface, press it properly, and cure instantly in cooling to complete the bonding.

 

Product Physical Property Sheets

Appearance	Milk white film
Thickness	0.05mm~0.2mm or Customized
Width	2cm~1.4m
Softening Point(Ring and Ball)	130±5℃
Melt Pointing	90℃
Specific Viscosity	0.40±0.06
Washing Resistance Temperature	90℃
Operation Temperature	＞130℃
Tear Strength(Fabric +PVC)	45N

Aluminum honeycomb panel is a combination of panels, aluminum honeycomb, floor three layers of materials, are metal, used in the past bonding will use epoxy resin adhesive or polyurethane liquid adhesive mostly, some small honeycomb panel will also use PUR hot melt adhesive, the use of these adhesives disadvantages are, curing time is long, there is an obvious sense of fragile, the need for a relative system of production lines or equipment, Moreover, the epoxy resin film is relatively thick, the shelf life is short, and the storage is difficult. It is recommended to use thermoplastic hot melt adhesive film.